how to install evo water system

If you want to make sure your family always has access to healthy, uncontaminated water, installing an Evo water filtering system is a simple and efficient solution. But before knowing how to install Evo water system, you should understand why you need one. 

Evo water filters use cutting-edge filtration technology to rid your water of harmful chemicals and disagreeable tastes and odors, leaving you with pure, healthy drinking water. If you have an Evo water filtration system installed, you can get clean drinking water straight from the tap, without needing to buy bottles or a separate filtering pitcher. An Evo water filter is a great investment in your health because it removes contaminants like chlorine, sediment, heavy metals, and more, allowing you to drink cleaner water and feel better.

So, let us dig deep into the details of evo water system installation. 

Factors To Consider Before Installing Evo Whole House Water System

Here are some things to think about before putting in an Evo whole-house water system:

Water Quality

You should analyze your water for pollutants and their concentrations before putting it in an Evo whole-house water system. Using this information, you may select a filter that will efficiently rid your water of harmful substances. 


Where the water supply enters your home is where you should set up the Evo whole-house water system. Select a clean, dry, and convenient spot with plenty of room for the filter and its parts. 

Availability of Space

Think about how much space you’ve got in the spot you picked. So basically, the Evo Whole House System has this thing called a filter housing manifold and a bunch of filter housings. Make sure there’s enough space for the system without anything blocking it.

Water pressure 

The water pressure must be at least 25 psi for the Evo whole-house water system to function properly. A booster pump might be necessary if your water pressure is lower than this. 

Maintenance Requirement

The Evo whole-house water system needs regular maintenance to function properly, just like any other water filter. When maintaining and replacing filter cartridges, it is critical to refer to the manufacturer’s guidelines. 

Water flow rate

The Evo whole-house water system can handle up to 15 gallons of water per minute in flow. If your family uses more water than this, you may need to install more than one filter or upgrade to a larger filter. 

Where Should I Install Evo Whole-house Water System? 

Main Water Line

The best place to put your Evo whole-house water system is right at the main water line. By doing so, you may be assured that every tap, shower, and appliance in your home has access to pure, filtered water.


The garage, if connected to the house’s main water line, is a great spot to install the Evo system for purifying water throughout the home. It gives the filtration system a safe, central location to be out of the way of any weather or other environmental hazards.


Installing the Evo whole-house water system in a basement or utility room can be helpful if this space is near the home’s main water line. Installation, upkeep, and filter swapping are all simplified as a result.

Outdoor Shed Or Pump House

The fourth type of location suitable for installing an Evo whole-home water system is an outdoor pump house or shed near the main water supply line. To prolong the system’s useful life and peak performance, you should provide adequate ventilation and shield it from extreme weather.

How To Install Evo Water System?

Things Required

The Evo water system installation kit provides all of the components necessary to set up the system. Check that all of the parts are present before commencing the installation.

  • Evo Water System kit (includes filter housings, mounting hardware, cartridges, and necessary fittings)
  • Sediment filter
  • Carbon filter
  • Spanner wrench
  • O-rings
  • Lubes
  • Teflon tape
  • Screwdriver
  • Pliers
  • Marker
  • Measuring tape
  • Safety goggles
  • Gloves

Choose The Installation Location

Determine the most suitable location for your Evo water filter. It should be close to the water source you want to filter, such as under the sink or in the basement.

Shut Off The Water Supply

Locate the main water shut-off valve for your home and turn it off. This step ensures that no water flows through the pipes while you’re installing the filter. Use a wrench or pliers to disconnect the water supply line from the faucet and the cold water pipe.

Secure Wall-Mounting Bracket

Attach the horizontal mounting bracket to the wall using the included screws. Before you screw the bracket into the wall, make sure it is level. You may need to use a different type of mounting screw depending on whether you’re attaching the bracket to wood, cement, or bricks. 

Install Manifold For The Filter Housing

Attach the filter head manifold to the mounting bracket after you’ve secured it to the wall. Remove the filter housing screws and replace the manifold on the filter head. It’s important to remember that the input valve goes on the left and the output valve goes on the right. Fasten the manifold head in place with the tested bolts.

To The Manifold, Affix The Filter Housings

Just remove the filter housings from the head manifold. Spread a small amount of oil or grease on the filter housing o-rings. Replace the filter housings onto the head manifold and secure the screws. Verify that the filter cartridges are properly inserted and centered within the housing. Carefully secure the filter housings using the included cartridge wrench.

Connect The Water Supply Line

Take the water supply line provided with the Evo water filter and connect it to the filter head. Use Teflon tape or thread sealant on the threads for a secure connection. Tighten the connection using a wrench or pliers.

Check The Connections

Double-check all the connections you’ve made so far to ensure they are tight and secure. Make sure there are no leaks.

Turn On The Water Supply

Once you’ve confirmed all the connections are secure, turn on the main water shut-off valve to restore water flow to your home.

Flush The Filter

It’s important to flush the filter to remove any air or lose particles before using it for drinking or cooking. Refer to the manufacturer’s instructions on how to properly flush the filter. This usually involves running water through the filter for a specific amount of time or until the water runs clear.

Test The System

After flushing the filter, test the Evo water filter system by turning on the faucet connected to the filtered water supply. Ensure that the water flows smoothly and check for any signs of leaks or issues.

Pro Tip

It’s important to refer to the manufacturer’s instructions that come with your specific Evo water filter for the most accurate guidance.

Precautions When Installing Evo Water System

Following these steps will help reduce the likelihood of leaks, damage, or other complications during the installation of your Evo whole-house water system.

Turn Off The Main Water Supply

Be cautious to turn off the main water supply to your property before beginning the installation process. This prevents water from leaking or causing harm during the installation process. Before continuing with the installation, you need to find the main water shut-off valve and close it.

Do As Directed By The Manufacturer

The Evo whole-house water system requires careful attention to the manufacturer’s instructions. Installation recommendations and requirements, such as required hardware, suggested procedures, and security measures, may vary for each system. Adherence to these instructions guarantees a successful installation and protects against any problems or damage that could arise.

Inspect All Connections And Sealings

Overtightening connections can be damaging, so be careful not to do that. After installation, keep an eye out for any symptoms of water seepage or leaks so you can fix the problem as soon as possible.

Frequently Asked Questions

When should I change out the filter cartridges?

Once a year, swap out your Evo water filters. The efficiency of the pre-sediment filter can be maintained by rinsing it, but it must be replaced annually. Every year, you’ll also need to swap out the carbon filter. However, the salt-free e-soft cartridge is maintenance-free. 

How long does it take to install the Evo Water System up and running?

How long it takes to set up will depend on factors like how well you understand plumbing and how complicated your home’s water supply system is. Depending on how quickly you complete the basic procedures, mounting, connecting pipes, and testing the system, the installation process might take anywhere from one to three hours.

After installation of a new water filter, what should you do?

After replacing your filter, you should run a flush cycle. To “flush” a filter is to pass water through it multiple times before drinking from it.

Final Thoughts

There are several ways in which the Evo whole-house water system can improve your family’s water supply. Water quality, water pressure, installation location, flow rate, and maintenance needs are all things to think about before installing the system at the point where the water supply enters your home.

The Evo whole house water system can supply your family with potable water that is free of harmful contaminants and tastes fantastic. I am sure that now you know how to install evo water system perfectly by our given step-by-step guide. 

Spread the love

Leave a Comment